Crane Rental in Kennedale, TX
Crane rental in Kennedale serves a small city that is growing and building its own infrastructure. The Census Bureau's 2020 count was 8,517, and its July 1, 2025 estimate is 10,626, a 24.9% rise from its 2020 base. The Handbook of Texas places Kennedale "ten miles southeast of Fort Worth in southeastern Tarrant County," and the Kennedale Economic Development Corporation (KEDC) sums up its location as "Located on I-20 and Highway 287." The City's own project lists run to roads, a creek-bank wall and pipes, so this page ties each crane and equipment service we offer to that work and to the highways a machine uses to get here.
Every Kennedale job starts with a written quote at no charge. A crane quote needs the load's weight, its starting and finishing points, the footing for the crane and the way a truck reaches it, any lines overhead, and the address and dates; a machine quote needs the model you want, the task, the ground it works on and how many days you need it. Those two points give the height and the radius, the flat distance from the crane's turning center out to the hanging load, and the manufacturer's load chart turns radius and boom length into a rated load. Every charge and any tax line is shown, and our page on crane and equipment costs explains the published ranges behind them.
each crane, lift and machine gets a written quote before any date is set.
Free quote
Roads, a Creek Wall and Sewer Lines: What Kennedale Is Building
Kennedale's main street began as a state highway. The City's history says State Highway 34 "was built through the town around 1932" and that "business activity gradually migrated to this roadway, now known as Kennedale Parkway," and the City of Kennedale's Streets page still names "Business 287 (Kennedale Parkway)" as a road the state maintains. The town is older than the highway: the Handbook dates a post office to 1884 and the townsite survey to 1886, on the Fort Worth and New Orleans line the City says later became the Southern Pacific. Kennedale voted to incorporate in July 1947 with a population of 300, and its Unified Development Code now names an "Old Town TownCenter District," zone OT-3.
The Handbook ties Kennedale's mid-century jobs to its big neighbor: "The development of the defense industry in Fort Worth beginning in the 1940s provided new jobs for area residents." The City's history records an early Kennedale Brick Works whose land the City acquired in 1976. The Kennedale EDC's site selector page now pitches "170,000 residents within 5 miles" and "1 million+ workers within 30-minute drive," and its employer carousel shows names including Sabre Industries, Frontier Waste Solutions and the school district. For business sites, Table 2.2 of the Unified Development Code lists commercial districts C-0, C-1 and C-2, an industrial district (I), employment center districts EC-1 to EC-3, and two overlays, the Commercial Corridor Overlay District and the Floodplain Overlay District.
The City of Kennedale's Street Projects page is the clearest public list of coming road work. It shows the N. Little School Rd. Extension at 30% of engineering design, with construction anticipated in 2027 and funding from the 2021 Tarrant County Transportation Bond, split 50-50 between the City and Tarrant County Precinct 2; a Kennedale Sublett Road rebuild from New Hope Road to Little School Road, budgeted at $14,878,006 and in design with the county bond program; the Eden Road Bridge Expansion, budgeted at $595,600 and scheduled for 2026; and a finished New Hope Rd. job from W. 4th St. to the Union Pacific railroad crossing. The Streets page adds that some city street repairs are done through interlocal agreements with Tarrant County Precinct 2.
Village Creek runs through Kennedale's past and its project list. The City's history places early hunting and fishing grounds on Village Creek "near the present site of Kennedale," and the City "will construct a gabion wall along the right bank of Village Creek" for its Valley Ln. Streambank Stabilization project: $2,734,000, most of it a FEMA grant, with construction from early spring 2027 to December 2028. Lake Arlington sits on the same creek; Texas Parks and Wildlife places it "just north of Interstate 20 off Arkansas Lane in Arlington," and no source we hold puts Kennedale on its shore. For water and sewer, the City's Current Water Projects page lists a wastewater interceptor budgeted at $11,000,000 and a ground storage tank budgeted at $963,919.
See Kennedale, TX on Google Maps — we quote work in this city from Arlington.
Cranes for Kennedale Jobs, Matched to Load, Ground and Road
A Kennedale crane is quoted one of two ways: operated, with an operator we provide and hourly billing that carries a minimum, or bare, with only the machine and your own person at the controls. OSHA section 1926.1427 decides who that person may be. "When a state or local government issues operator licenses" for these cranes, "the equipment operator must be licensed by that government entity"; elsewhere "the operator must be certified in accordance with paragraph (d) or (e) of this section," the accredited-testing and audited-employer routes, and the employer must still evaluate the operator and document it. Bare rentals start with our question about who that operator is. For Kennedale lifts, the load at its radius, the ground and the road in set the crane class.
Truck Cranes for Kennedale Parkway and Side Streets
A mobile crane, a hydraulic boom carried on a road truck that reaches the site under its own power, suits one-day picks in Kennedale such as a sign on Kennedale Parkway or a unit on a shop roof. The Parkway is Business 287, which the City lists as state-maintained, so for a setup there we check what the state requires; the City's permit and code pages would not open for us, so its side-street rules are not stated here. The City does post street work notices: for pavement work on Oak Ridge Trail starting October 26, it asked that vehicles be off the street "from 7:00AM to 6:00PM." The way outriggers and load charts size these cranes is set out under mobile crane rental.
All-Terrain Cranes for Kennedale's Heaviest Picks
An all-terrain crane, a telescopic crane on a carrier with many axles that can cross the highway and then handle a rough site, is the Kennedale choice when a load is too heavy for a truck crane at the radius the site forces. Table 2.2 of the City's Unified Development Code lists commercial districts C-0 to C-2, an industrial district and employment center districts EC-1 to EC-3. Bringing an AT into town is a routing job: TxDMV restriction 69386 limits permitted loads on the I-20 westbound to US 287 southbound move to a width of 14 feet, with a length cap as well, so the approach from I-20 is planned before the crane leaves. Compare it with a truck crane under all-terrain crane rental.
Rough-Terrain Cranes for Kennedale's Road and Creek Work
A rough-terrain crane is hauled in on a lowboy trailer and then moves around the job on oversized tires, which suits Kennedale's planned work on unbuilt ground. The City lists the N. Little School Rd. Extension with construction anticipated in 2027, and a gabion wall along Village Creek's right bank, scheduled for construction from early spring 2027 to December 2028. A creek bank that needs stabilizing is the kind of ground OSHA section 1926.1402 is written for: "The equipment must not be assembled or used unless ground conditions are firm, drained, and graded" enough, with supporting materials where necessary, for the maker's support and level figures. Four-wheel steering and crane mats get their own explanation under rough-terrain crane rental.
Crawler Cranes and Kennedale's Low Building Heights
A crawler crane, the track-mounted crane that is trucked in sections and assembled on site, belongs to long, heavy projects, and the building heights Kennedale's code sets, where we could read it, are low: Table 4.3 of the Unified Development Code caps Old Town buildings at 35 feet in OT-1 and OT-2 and 50 feet in OT-3 and OT-4. Heights for the commercial, industrial and employment districts sit in the part of the code we could not read. When a crawler does come, its assembly follows OSHA sections 1926.1403 and 1926.1404, which list hazards the person directing it must address, from "Site and ground conditions" to "The effect of wind speed and weather on the equipment." See crawler crane rental for transport and mats.
Boom Trucks for Kennedale's Old Town and Shop Roofs
A boom truck, a crane boom mounted behind the cab of a heavy truck, can reach the roof of a low building when it parks close, and Kennedale's Old Town districts keep buildings low. The truck's own load chart decides whether the pick works at the distance the curb or lot allows. Overhead lines are the other check before a boom truck sets up. Texas Health and Safety Code section 752.004 bars work where any part of a machine may come "within six feet of a high voltage overhead line," and section 752.003 makes the party doing the work pay "the actual expense incurred by the operator in providing the clearance." Truck ratings and reach are compared under boom truck rental.
Spider and Mini Cranes Inside Kennedale Campuses and Shops
A spider crane, a compact crawler crane that folds small and then braces itself on spread legs, works inside and behind buildings where no truck can reach. Kennedale ISD, with "nearly 2700 students across 5 campuses," saw voters pass Propositions A, B and D of its 2023 bond, and Proposition A put $97,930,000 toward campus additions, renovations, HVAC and roofing, and safety and security. Renovation inside a building is what makers market these cranes for: UNIC says its URW-295 "can access through a standard door frame" and offers a "Battery crane option also available for sensitive environments." We name the bond as the district describes it, not as our work. Floor loads and door sizes are covered under spider crane rental.
Rooftop Unit Lifts on Kennedale School and Business Roofs
An HVAC crane lift in Kennedale sets, swaps or removes rooftop units (RTUs), the self-contained heating and cooling boxes that sit on curbs atop flat roofs, on school, shop and office buildings. HVAC and roofing were among the Proposition A items in Kennedale ISD's 2023 bond, which voters passed in part at a May 6 election. The unit work belongs to the HVAC contractor; ours is the crane, its operator, a rigging plan and the lift. Heat shapes the working day: NOAA's 1991-2020 normals give DFW Airport 20.3 days a year at 100 degrees F or more, and NWS Fort Worth/Dallas counted 27 of them in August 2026 alone, a total matched in 2000 and 1952. Unit weights are under HVAC crane service, and the heat records under weather and project numbers for the Arlington area.
Lift Plans and Storm Calls for Kennedale Picks
A Kennedale lift plan has to say what stops the work, because storms are part of the city's record. The National Weather Service's Kennedale-Arlington tornado survey rated the April 3, 2012 tornado EF-2, with "estimated maximum wind speeds of 135 mph," and says "The damage started in Kennedale east of North Little Road and north of Swiney Hiett Road"; NWS put its path at 4.6 miles long and about 150 yards wide. OSHA's 29 CFR 1926.1417(h) then applies: "When a local storm warning has been issued, the competent person must determine whether it is necessary" to put the maker's securing steps in place, a competent person being "one who is capable of identifying existing and predictable hazards in the surroundings or working conditions." See rigging and lift planning for written plans and signals.
Heavy Hauls to Kennedale on I-20 and US 287
A heavy haul to Kennedale runs on a TxDMV permit once the load passes Texas legal limits, and on the limits set for the city's two highways. On I-20, restriction 66950 holds both frontage roads to 11 feet of width between a Fort Worth cross street and Arlington's Green Oaks Blvd. On US 287, restriction 67615 sets the same 11-foot width on the frontage roads from Sublett Rd to Village Creek Rd, both in Fort Worth. TxDOT's Southeast Connector, a $2.3 billion widening of I-20 and I-820 that also rebuilds the I-20, I-820 and US 287 interchanges estimated for completion in 2028, names Fort Worth and Forest Hill, not Kennedale; our Fort Worth crane rental page covers that city. TxDMV permit types and escort rules for a Kennedale delivery are walked through in heavy haul and machinery moving.
Equipment for Kennedale's Digging, Grading and Building Work
Kennedale equipment goes out on day, week or month terms, and the maker's operating information rides along with each machine. Whoever runs a forklift, a telehandler, a boom lift or a scissor lift needs the training OSHA requires and ANSI/SAIA describes, and we ask about it; the ANSI webstore says ANSI/SAIA A92.22-2021 "specifies requirements for application, inspection, training, maintenance, repair" and operation of these lifts. Texas 811 is called before any digging, by you or by us. In Kennedale's public record, that digging and grading is mostly roads, a creek bank, and sewer and water lines.
Excavators for Kennedale's Sewer Interceptor and Water Work
In Kennedale's public project list, an excavator's work is pipe work. The City's Current Water Projects page shows a "Sanitary Sewer - Wastewater Interceptor" budgeted at $11,000,000 and scheduled "Design; Dec 2027," paid from the $17,065,000 Series 2023 certificates of obligation. Before the bucket goes in, Texas811 defines the tolerance zone for a pipeline as "a minimum of 18 inches on either side of the outside edge of the underground pipeline on a horizontal plane." In the trench, 29 CFR 1926.652 says "Each employee in an excavation shall be protected from cave-ins by an adequate protective system," except in cuts that "are made entirely in stable rock" or that "are less than 5 feet (1.52m) in depth" where a competent person sees no sign of a cave-in. Mini to full-size classes are weighed under excavator rental.
Skid Steers and Track Loaders on Kennedale's Clay and Loam
A skid steer is a small loader with no steering axle, turning by speeding up one side's wheels or tracks, and on Kennedale lots it grades, backfills and cleans up. Which ground it meets is a site question: no soil map for Kennedale was read for our facts, and in the Handbook of Texas, Tarrant County ranges from a Grand Prairie of "shallow, clayey soil and alternating layers of limestone and marl" to Eastern Cross Timbers of "deep loamy soil." The City's code also lists a Floodplain Overlay District, whose text we could not reach. OSHA's 29 CFR 1926.1000 extends its rollover protection rules to "rubber-tired skid-steer equipment" units "manufactured after July 15, 2019, that are used in construction work." Wheels and tracks on soft ground are weighed in skid steer and track loader rental.
Telehandlers on Kennedale Building Sites
A telehandler is a reach forklift whose boom extends forward and up, placing pallets of block, roofing and framing on upper floors and roofs, including on buildings of up to 50 feet that Kennedale's Old Town TownCenter District allows. OSHA's Powered Industrial Trucks eTool files it within Class VII rough terrain forklifts and cautions that "the term 'rough terrain' does not imply that the forklift can be safely operated on every conceivable type of terrain." On a creek-side or freshly graded Kennedale lot, that means checking slope and firmness before the boom goes out. Before driving, the operator needs the training and evaluation required by OSHA section 1910.178(l). Reach and height ratings for example models sit under telehandler rental, with the cases where a crane fits better.
Boom Lifts Along Kennedale Parkway's Storefronts
A boom lift is an aerial platform at the end of an extending boom, and it reaches over curbs, canopies and landscaping to a sign or an upper wall, the kind of reach a storefront on Kennedale Parkway can need. Near the road, the lines come first. OSHA's fact sheet on aerial lifts reads: "Treat all overhead power lines and communication cables as energized, and stay at least 10 feet (3 meters) away." Texas chapter 752 adds its own six-foot rule. In the basket, the same fact sheet calls for "a body harness or a restraining belt with a lanyard attached to the boom or bucket." For a sign or a second-story wall, boom lift rental shows which height and outreach fit.
Scissor Lifts for Kennedale Classrooms and Shop Interiors
A scissor lift is a platform raised vertically by folding steel supports, the machine for ceilings, lights and ducts inside Kennedale's schools and shops. Outdoors it is limited: OSHA's Scaffolding eTool says lifts "rated for outdoor use are generally limited to wind speeds below 28 miles per hour," and OSHA's scissor lift hazard alert says to use one outside "only when weather conditions are good." NOAA's yearly peak gusts at DFW Airport passed 70 mph in 2019, 2023, 2024 and 2025, so outdoor deck work here follows the forecast. The same hazard alert says "Employers must provide workers training on hazards, including how to work safely with or near scissor lifts." Deck heights and chassis widths for classroom doors are listed in scissor lift rental.
Forklifts for Kennedale's Industrial Yards and Shops
A forklift is a lift truck that carries loads on two forks, and for a Kennedale job the surface picks the truck: cushion tires on a finished slab, pneumatic tires or a Class VII rough terrain truck in a yard or on a site. Kennedale's code sets aside an industrial district and three employment center districts, and the KEDC markets the city's spot on I-20 and Highway 287 to site selectors. OSHA section 1910.178(l) requires training and an evaluation before anyone drives, with the evaluation repeated "at least once every three years," and on a building site 29 CFR 1926.602(d) applies requirements "identical" to it. Load centers and tire types for yard and slab work are explained in forklift rental.
Backhoes and Loaders for Kennedale Street and Bridge Jobs
A backhoe loader is a rubber-tired tractor with a loader on the front and a digging arm on the back, so it can open, load and refill a trench in one visit. Kennedale's street list, from the Sublett Road rebuild in design to the Eden Road Bridge Expansion the City scheduled for 2026, is the kind of work where digging, loading and backfilling go together. Texas Utilities Code section 251.151 sets the notice window: the notification center hears from you "not earlier than the 14th day" before the dig "or later than the 48th hour" before it, not counting Saturdays, Sundays and legal holidays. For loading stockpiles alone, a wheel loader is the larger choice. See backhoe and loader rental for dig depth and bucket sizes.
Dozers for Kennedale's Road Extension and Open Tracts
A dozer, a tracked machine that pushes soil with a wide front blade, cuts and fills ground for new roads and pads, and the N. Little School Rd. Extension is the clearest Kennedale case: a new road the City lists at 30% of engineering design, with construction anticipated in 2027. The City's code also lists a Floodplain Overlay District, whose terms we could not read, so grading near Village Creek starts with a question to the City. OSHA's 29 CFR 1926.1000 brings "crawler tractors" used in construction under its rollover protection rules, and Texas811 says "Texas law requires excavators to contact 811 at least two business days before excavating." Blade capacity and track width for pad and road work are set out in dozer rental.
Kennedale Permits, State Roads and Lines Before a Lift
Kennedale's own rules for a crane were only partly online when we checked. The City's permit, contractor registration, inspection scheduling and municipal code pages answered with server errors, and its Unified Development Code could be read only through Article 5, so we cannot state Kennedale's construction hours, right-of-way permit or floodplain overlay terms, and we do not borrow Arlington's. What did load: the City of Kennedale's Building Inspections page, which links building permit applications, pre-application conferences, fire review, contractor registration and inspection scheduling, with permits filed on the MyGov portal, and the adopted codes, including the 2018 International Building Code and 2017 National Electrical Code, approved April 21, 2020 under Ordinance 691 and effective May 15, 2020. The City says it is evaluating the 2024 ICC codes.
Roads split between the state, the county and the City. The City's Streets page says "Highways and access roads are maintained by the state," and TxDOT's Fort Worth District says it "plans, designs, builds, operates and maintains the state transportation system" in Tarrant County and eight other counties. Some city street repairs run through interlocal agreements with Tarrant County Precinct 2, and the KEDC points builders to the City's Development Review Committee. For any of these roads, we find out which agency's permit and hours apply to the crane or machine and report back before a date is fixed. The state and federal rules behind the list below are collected in our Arlington crane permit guide.
- TxDMV says "Vehicles and loads exceeding 14 feet wide, 16 feet high, or 110 feet long may not be moved" on listed holidays such as Thanksgiving Day, 11/26/2026.
- Where 14 CFR 77.9 calls for notice, such as any crane over 200 feet above ground, 14 CFR 77.7 wants Form 7460-1 "at least 45 days before the start date of the proposed construction" or alteration.
- Breaking the six-foot rule is punishable under section 752.007 by "a fine of not less than $100 or more than $1,000, confinement in jail for not more than one year, or both."
- Under 29 CFR 1926.1408(c), a line's owner "must provide the requested voltage information within two working days of the employer's request."
- A crane carrier over 175,000 pounds gross on a TxDMV mileage permit needs front and rear escorts when crossing bridges.
Kennedale FAQs
Does a crane coming to Kennedale have to wait out rush hour?
A mobile crane does not; a trailered machine on an oversize permit does. TxDMV's curfew list, dated effective September 30, 2025, holds "Tarrant County All oversize vehicles" during "7 a.m. - 9 a.m. & 4 p.m. - 6 p.m." on weekdays, and marks the entry "Mobile cranes are not affected." So a truck crane running on the yearly crane permit, whose fee Transportation Code section 623.182 puts at $100, can travel in those hours, while an excavator or dozer riding oversize on a lowboy waits. Kennedale's two highways add route limits for permitted loads, so we plan the departure and the route together.
Who do I ask about setting up a crane on Kennedale Parkway?
Start with the state, which maintains it. The City of Kennedale's Streets page gives Business 287 (Kennedale Parkway) as its local example of highways and access roads the state maintains, and TxDOT's Fort Worth District runs the state system in Tarrant County. The City's own permit pages could not be opened during our research, so we do not state a City rule for the Parkway or for side streets. Before a date is set, we ask the maintaining agency, and the City where its streets are involved, what a crane or lift beside the road requires, and report what has to be filed, and who files it.
Can heavy equipment work along Village Creek in Kennedale?
It can once the ground, the floodplain rules and the buried lines are checked. The City's own creek work shows the bank needs care: its Valley Ln. Streambank Stabilization project will build a gabion wall on Village Creek's right bank, with construction set for early spring 2027 to December 2028. Kennedale's Unified Development Code lists a Floodplain Overlay District, but its text lay beyond the part of the code we could read, so we ask the City what applies before work starts. A crane there needs ground OSHA would call "firm, drained, and graded," with mats if needed, and no excavator touches the bank until Texas 811 has been called.
What size crane do I need for a building in Kennedale's Old Town?
The load and its reach decide it more than the building's height. Kennedale's Unified Development Code caps Old Town buildings at 35 feet in OT-1 and OT-2 and 50 feet in OT-3 and OT-4 (Table 4.3), so the lifts are low, but a heavy unit set far from where the truck can park can still call for a bigger crane, because rated load falls as radius grows. Manitowoc notes that hook blocks and rigging weight "must be subtracted from the rated load to obtain the weight that can be lifted." For a quote, tell us what the unit weighs, where it is picked and where it sets down, the ground, any wires above and the street address.
Get Your Free Kennedale Quote
Free quote